Material: Steel sheet powder-coated in anthracite or aluminum-silver look, 2 shelves (1 shelf optional), drip tray in galvanized sheet steel, brochure compartment in the right-hand door. Doors are lockable.

Weight: 116 kg

Dimensions: Height: 2100 mm Width: 950 mm depth: 550 mm

Oil cabinet contents:
1 x Product catalog (part no. 5452)
1 x Workshop solutions (part no. 5575)
1 x Oil guide for cars (part no. 5430)
1 x Oil guide for commercial vehicles (part no. 5431)
1 x overview of special oils (part no. 5635)
1 x order form for additional labels
3 x additional labels 20 l
1 x environmental certificate
1 x transparent measuring beaker 1 l

(part no. 7920)

The cabinet is delivered fully assembled.

The right oil for every vehicle – all oil specialties neat and organized in the LIQUI MOLY oil cabinet!
 

• Specially developed for the new LIQUI MOLY 20-liter canister.
• This allows you to store the usually smaller quantities of valuable special oils safely and clearly.
• Offset shelves prevent dripping onto the lower levels.
• Integrated oil drip pan, so that there are no problems with authorities.
• Lockable, i.e. no more “oil loss”.
• Document compartments integrated into the door, e.g. for technical data sheets.

The following content is available:

• 8 x 20-liter canisters and 2 x 60-liter drums. The cabinet then contains 2 shelves, 8 drain cocks (part no. 7924) and 2 hand pumps for 60-liter drum (part no. 7932).
  or
• 12 x 20-liter canisters. The cabinet then contains 3 shelves and 12 drain cocks (part no. 7924).

Available for free in conjunction with an appropriate oil order and purchase volume (based on a license and use agreement). For more details, get in touch with your responsible sales representative.

• The LIQUI MOLY gear oil cabinet is an in-house development and is produced exclusively for LIQUI MOLY customers.
• The body, doors and internal dividers are made of high-quality, powder-coated sheet steel, in aluminum-silver or anthracite color.
• The cabinet also has 1 pull-out oil drip tray, 3 drain cocks, 1 holder for 1 manual metering syringe (part no. 7989) and 2 storage compartments for extra labels, oil guide, etc. on the inside of the right-hand door.
• Drill holes and reinforcement plates on the rear panel for wall fixing.

Weight: 52 kg

Dimensions (H x W x D): 950 x 630 x 550 mm

(part no. 7993)

Available for free in conjunction with an appropriate oil order and purchase volume (based on a license and use agreement). For more details, get in touch with your responsible sales representative.

The following content is possible:
3 x 20-liter containers, 3 x 6-pack of the 1-liter gear oil bottle

• The Motorbike oil cabinet was specifically designed for 20-liter and 1-liter LIQUI MOLY containers.
• Sturdy design, made from powder-coated steel plate for wall mounting.
• Ideal for the safekeeping of Motorbike motor and transmission oils.
• With integrated oil sump and document compartment for technical data sheets.

Weight: 52 kg

Dimensions (H x W x D): 950 x 630 x 550 mm

(part no. 7990)

Available for free in conjunction with an appropriate oil order and purchase volume (based on a license and use agreement). For more details, get in touch with your responsible sales representative.

The following content is possible:
3 x 20-liter containers, 3 x 6-pack of the 1-liter motorcycle oil canisters